2021, 5月 16(日曜日)
dmesg CitrixHypervisor 8.2 / NetBSD 9.1R
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.1 (GENERIC) #0: Sun Oct 18 19:24:30 UTC 2020 [ 1.000000] mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC [ 1.000000] total memory = 1019 MB [ 1.000000] avail memory = 966 MB [ 1.000000] cpu_rng: RDSEED [ 1.000000] rnd: seeded with 256 bits [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Hyper-V Version: 0.0.0 [SP0] [ 1.000000] Features=0x870<APIC,HYPERCALL,VPINDEX,TMFREQ> [ 1.000000] PM Features=0x0 [C0] [ 1.000000] Features3=0x0 [ 1.000000] Recommends: 00000000 00000000 [ 1.000000] Limits: Vcpu:0 Lcpu:0 Int:0 [ 1.000000] HW Features: 0000000b, AMD: 00000000 [ 1.000000] Kernelized RAIDframe activated [ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000003] Xen HVM domU (4.13) [ 1.000003] mainbus0 (root) [ 1.000003] ACPI: RSDP 0x00000000000EA020 000024 (v02 Xen ) [ 1.000003] ACPI: XSDT 0x00000000FC00DA20 000044 (v01 Xen HVM 00000000 HVML 00000000) [ 1.000003] ACPI: FACP 0x00000000FC00D5D0 0000F4 (v04 Xen HVM 00000000 HVML 00000000) [ 1.000003] ACPI: DSDT 0x00000000FC0042A0 0092A3 (v02 Xen HVM 00000000 INTL 20160527) [ 1.000003] ACPI: FACS 0x00000000FC004260 000040 [ 1.000003] ACPI: APIC 0x00000000FC00D6D0 000260 (v02 Xen HVM 00000000 HVML 00000000) [ 1.000003] ACPI: HPET 0x00000000FC00D9B0 000038 (v01 Xen HVM 00000000 HVML 00000000) [ 1.000003] ACPI: WAET 0x00000000FC00D9F0 000028 (v01 Xen HVM 00000000 HVML 00000000) [ 1.000003] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.000003] ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x11, 48 pins [ 1.000003] cpu0 at mainbus0 apid 0 [ 1.000003] cpu0: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz, id 0x706a8 [ 1.000003] cpu0: package 0, core 0, smt 0 [ 1.000003] cpu1 at mainbus0 apid 2 [ 1.000003] cpu1: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz, id 0x706a8 [ 1.000003] cpu1: package 0, core 2, smt 0 [ 1.000003] cpu2 at mainbus0 apid 4 [ 1.000003] cpu2: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz, id 0x706a8 [ 1.000003] cpu2: package 0, core 4, smt 0 [ 1.000003] cpu3 at mainbus0 apid 6 [ 1.000003] cpu3: Intel(R) Pentium(R) Silver J5040 CPU @ 2.00GHz, id 0x706a8 [ 1.000003] cpu3: package 0, core 6, smt 0 [ 1.000003] acpi0 at mainbus0: Intel ACPICA 20190405 [ 1.000003] acpi0: X/RSDT: OemId < Xen, HVM,00000000>, AslId <HVML,00000000> [ 1.000003] acpi0: SCI interrupting at int 9 [ 1.000003] acpi0: fixed power button present [ 1.000003] acpi0: fixed sleep button present [ 1.000003] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 [ 1.009761] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.009761] timecounter: Timecounter "hpet0" frequency 62500000 Hz quality 2000 [ 1.017809] MEM0 (PNP0C02) at acpi0 not configured [ 1.017809] SYSR (PNP0C02) at acpi0 not configured [ 1.017809] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 [ 1.017809] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 [ 1.017809] spkr0 at pcppi1: PC Speaker [ 1.017809] wsbell at spkr0 not configured [ 1.017809] midi0 at pcppi1: PC speaker [ 1.017809] sysbeep0 at pcppi1 [ 1.017809] pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12 [ 1.017809] pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.017809] FDC0 (PNP0700) at acpi0 not configured [ 1.017809] UAR1 (PNP0501) at acpi0 not configured [ 1.017809] LTP1 (PNP0400) at acpi0 not configured [ 1.017809] HP0 (PNP0C02) at acpi0 not configured [ 1.017809] ACPI: Enabled 2 GPEs in block 00 to 0F [ 1.017809] attimer1: attached to pcppi1 [ 1.017809] pckbd0 at pckbc2 (kbd slot) [ 1.017809] pckbc2: using irq 1 for kbd slot [ 1.017809] wskbd0 at pckbd0: console keyboard [ 1.017809] pms0 at pckbc2 (aux slot) [ 1.017809] pckbc2: using irq 12 for aux slot [ 1.017809] wsmouse0 at pms0 mux 0 [ 1.017809] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.017809] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.017809] pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) [ 1.017809] pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) [ 1.017809] piixide0 at pci0 dev 1 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) [ 1.017809] piixide0: bus-master DMA support present [ 1.017809] piixide0: primary channel wired to compatibility mode [ 1.017809] piixide0: primary channel interrupting at ioapic0 pin 14 [ 1.017809] atabus0 at piixide0 channel 0 [ 1.017809] piixide0: secondary channel wired to compatibility mode [ 1.017809] piixide0: secondary channel interrupting at ioapic0 pin 15 [ 1.017809] atabus1 at piixide0 channel 1 [ 1.017809] uhci0 at pci0 dev 1 function 2: vendor 8086 product 7020 (rev. 0x01) [ 1.017809] uhci0: interrupting at ioapic0 pin 23 [ 1.017809] usb0 at uhci0: USB revision 1.0 [ 1.017809] piixpm0 at pci0 dev 1 function 3: vendor 8086 product 7113 (rev. 0x01) [ 1.017809] timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 900 [ 1.017809] piixpm0: 24-bit timer [ 1.017809] piixpm0: SMBus disabled [ 1.017809] vga0 at pci0 dev 2 function 0: vendor 1013 product 00b8 (rev. 0x00) [ 1.017809] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 [ 1.017809] wsmux1: connecting to wsdisplay0 [ 1.017809] drm at vga0 not configured [ 1.017809] vendor 5853 product 0001 (SCSI mass storage, revision 0x01) at pci0 dev 3 function 0 not configured [ 1.017809] re0 at pci0 dev 4 function 0: RealTek 8139C+ 10/100BaseTX (rev. 0x20) [ 1.017809] re0: interrupting at ioapic0 pin 32 [ 1.017809] re0: Ethernet address 00:00:00:00:00:01 [ 1.017809] re0: using 64 tx descriptors [ 1.017809] rlphy0 at re0 phy 0: Realtek internal PHY [ 1.017809] rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.017809] re1 at pci0 dev 5 function 0: RealTek 8139C+ 10/100BaseTX (rev. 0x20) [ 1.017809] re1: interrupting at ioapic0 pin 36 [ 1.017809] re1: Ethernet address 00:00:00:00:00:02 [ 1.017809] re1: using 64 tx descriptors [ 1.017809] rlphy1 at re1 phy 0: Realtek internal PHY [ 1.017809] rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.017809] isa0 at pcib0 [ 1.017809] lpt0 at isa0 port 0x378-0x37b irq 7 [ 1.017809] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo [ 1.017809] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.017809] acpicpu0 at cpu0: ACPI CPU [ 1.017809] acpicpu0: C1: HLT, lat 0 us, pow 0 mW [ 1.017809] hyperv0 at cpu0: Hyper-V [ 1.017809] acpicpu1 at cpu1: ACPI CPU [ 1.017809] acpicpu2 at cpu2: ACPI CPU [ 1.017809] acpicpu3 at cpu3: ACPI CPU [ 1.017809] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 2.042884] IPsec: Initialized Security Association Processing. [ 2.052898] uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.052898] uhub0: 2 ports with 2 removable, self powered [ 4.496285] uhidev0 at uhub0 port 2 configuration 1 interface 0 [ 4.506739] uhidev0: QEMU 0.10.2 (0x627) QEMU USB Tablet (0x01), rev 1.00/0.00, addr 2, iclass 3/1 [ 4.536345] ums0 at uhidev0: 3 buttons and Z dir [ 4.536345] wsmouse1 at ums0 mux 0 [ 5.027062] wd0 at atabus0 drive 0 [ 5.037572] wd0: <QEMU HARDDISK> [ 5.037572] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 5.037572] wd0: 65536 MB, 133152 cyl, 16 head, 63 sec, 512 bytes/sect x 134217728 sectors [ 5.057624] wd0: 32-bit data port [ 5.057624] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) [ 5.057624] wd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA) [ 9.062617] atapibus0 at atabus1: 2 targets [ 9.072626] cd0 at atapibus0 drive 1: <QEMU DVD-ROM, QM00004, 0.10> cdrom removable [ 9.072626] cd0: 32-bit data port [ 9.072626] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) [ 9.072626] cd0(piixide0:1:1): using PIO mode 4, DMA mode 2 (using DMA) [ 9.082639] boot device: wd0 [ 9.094291] root on wd0a dumps on wd0b [ 9.102673] root file system type: ffs [ 9.102673] kern.module.path=/stand/amd64/9.1/modules [ 13.278463] wsdisplay0: screen 1 added (80x25, vt100 emulation) [ 13.278463] wsdisplay0: screen 2 added (80x25, vt100 emulation) [ 13.278463] wsdisplay0: screen 3 added (80x25, vt100 emulation) [ 13.278463] wsdisplay0: screen 4 added (80x25, vt100 emulation)
コメント記入
次のフォームにコメントを記入してください。